CT340 controller for rotary cutters
CT340 controller for rotary cutters
The Motrona CT340 controls rotary cross-cutters and rotating printing, punching or sealing rolls with a very short loop time of about 250 µs.
2 encoder inputs HTL or RS422, up to 300 kHz
4 fast push-pull transistor outputs
Scalable 14-bit analog output ±10 V or 0/4 to 20 mA
Cutting length set via keyboard, RS232 setup
24 VAC or 17 to 40 VDC supply
Panel housing 96 x 48 x 140 mm
Additional information
| Sector | Factory Automation |
|---|---|
| Supply voltage | 17–40 VDC, 24 VAC |
| Mounting | Panel |
| Dimensions | 96 x 48 x 140 mm |
| Digital inputs | 4 |
| Digital outputs | 4 |
| Analog outputs | 1 |
| Fieldbus/Interface | RS-232 |
Contact David Kelly if you need assistance!
Contact Cezary Wieckowski if you need assistance!
Contact Ingvar Sporsem if you need assistance!
Contact Jakob Christiansen if you need assistance!
Contact Janne Kotikangas if you need assistance!
Contact Tom Schönberg if you need assistance!
Tom Schönberg will happily help you navigate through our collection of products.
Contact Janne Kotikangas if you need assistance!
Contact Tom Schönberg if you need assistance!
Tom Schönberg will happily help you navigate through our collection of products.
Contact Jonna Mäki-Petäjä if you need assistance!
Contact Stefan Rosenback if you need assistance!
Stefan Rosenback will happily help you navigate through our collection of products.
Contact Roland Isaksson if you need assistance!
Contact John Wilkins if you need assistance!
Contact Thorbjörn Hansson if you need assistance!
Contact John Håkansson if you need assistance!
Contact Peter Jidberg if you need assistance!
Contact Arturo Ramírez if you need assistance!
Arturo Ramírez will happily help you navigate through our collection of products.
