IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000B
IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy…
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Powe
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide…
IKS-6726A-sarja on suunniteltu vastaamaan teollisuuden ja liike-elämän kriittisten sovel
IKS-6726A-sarja on suunniteltu vastaamaan teollisuuden ja liike-elämän kriittisten sovellusten, kuten liikenteenohjausjärjestelmien ja merenkulkusovellusten, tiukkoihin vaatimuksiin. IKS-6726A:n Gigabit- ja Fast Ethernet -runkoverkko, redundantti rengasverkko sekä 24/48 VDC:n tai 110/220 VAC:n kaksoiseristetyt redundantit virtalähteet parantavat viestinnän luotettavuutta ja säästävät kaapelointi- ja johdotuskustannuksissa. Ominaisuudet ja edut 2 Gigabit- ja 24 Fast Ethernet -porttia kupari- ja kuituyhteyksille Turbo Ring…
IKS-6728A-sarja on suunniteltu vastaamaan liiketoiminnan ja teollisuuden kriittisten sovel
IKS-6728A-sarja on suunniteltu vastaamaan liiketoiminnan ja teollisuuden kriittisten sovellusten vaatimuksiin. IKS-6728A- ja IKS-6728A-8PoE-malleissa on jopa 24 10/100BaseT(X)- tai PoE/PoE+-porttia sekä 4 yhdistelmäporttia Gigabit Ethernet -liitäntöjä. IKS-6728A-8PoE-Ethernet-kytkimet tarjoavat jopa 30 watin tehon PoE+-porttia kohti vakiotilassa ja tukevat myös jopa 36 watin suuritehoista lähtöä raskaaseen käyttöön tarkoitetuille teollisille PoE-laitteille, kuten säänkestävillä pyyhkimillä ja lämmittimillä varustetuille IP-valvontakameroille, suorituskykyiset…
24 Gigabit Ethernet -porttia. Jopa 24 valokuituliitäntää (SFP-paikat). Tuulettimeton, k
24 Gigabit Ethernet -porttia. Jopa 24 valokuituliitäntää (SFP-paikat). Tuulettimeton, käyttölämpötila-alue -40–75 °C (T-mallit). Turbo Ring ja Turbo Chain (palautumisaika < 20 ms @ 250 kytkintä) sekä STP/RSTP/MSTP verkon redundanssia varten. Eristetyt, redundantit virtalähteet, jotka toimivat yleisellä 110/220 VAC -jännitealueella. Tukee MXstudio-ohjelmistoa, joka mahdollistaa helpon ja visuaalisen teollisuusverkkojen hallinnan. V-ON™ takaa millisekunnin tarkkuudella tapahtuvan multicast-datan ja...
10/100BaseT(X) automaattinen neuvottelu ja automaattinen MDI/MDI-X. Link Fault Pass-Throug
10/100BaseT(X) automaattinen neuvottelu ja automaattinen MDI/MDI-X. Link Fault Pass-Through (LFPT). Virrankatkos- ja portin katkeamishälytys releulostulon kautta. Redundantit virtalähteet. Käyttölämpötila-alue -40 – 75 °C (-T-mallit). Suunniteltu vaarallisille alueille (luokka 1, divisioona 2/vyöhyke 2, IECEx).
Tukee 10/100/1000BaseT(X) ja 1000BaseSFP-paikkaa. Link Fault Pass-Through (LFPT). Virranka
Tukee 10/100/1000BaseT(X) ja 1000BaseSFP-paikkaa. Link Fault Pass-Through (LFPT). Virrankatkos- ja portin katkeamishälytys releulostulon kautta. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx). More than 20 options available.
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X) ports to save the usage of copper ports High reliability and rigid IP-30 housing DIN-Rail and wall mounting
Monimoodi tai yksimoodi, SC- tai ST-kuituliittimellä. Link Fault Pass-Through (LFPT). DIP
Monimoodi tai yksimoodi, SC- tai ST-kuituliittimellä. Link Fault Pass-Through (LFPT). DIP-kytkimet FDX/HDX/10/100/Auto/Force-tilan valintaan.
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to f
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to fiber with SFP socket Support LFP (Link Fault Pass-through) function Supports full/half duplex operation mode P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts Supports store and forward transmission Provided DIP-Switch to set operation mode High reliability and rigid IP-30 housing DIN-Rail and…
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a M12 plug to devices with a D-Sub 9 connector. It allows various devices to connect to the CAN bus without the need for extra hardware, maintaining the use of existing devices and enhancing CAN system efficiency and…
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compli
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compliant D-Sub 9 connector. It is tailored for the Ixxat USB-to-CAN V2 and USB-to-CAN FD adapters and facilitates seamless CAN bus connections. This cable allows various devices to connect to the CAN bus without the need for extra hardware or…
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m lon
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m long, shielded and has twisted wires. The cable can also be used for CAN FD buses.
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m lon
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m long, shielded and has twisted wires. The D-Sub termination connector can also be used for CAN FD buses.
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD in
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interfa
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interface) and integrated bus termination resistors is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a…
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation up to 3 kV for higher protection of the CAN segments….
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN bus systems or to insert a galvanic isolation. The CAN-CR200 creates the necessary flexibility to optimize the structure of CAN…
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and one CAN backbone channel is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a physical…
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two seg
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV DC/3.5 kV AC for 1 second, allowing it to be utilized in medical applications. It can be used to improve the load capacity of the…
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD i
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with two CAN channels and
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with two CAN channels and galvanic isolation. It is an easy and very cost-efficient way to connect computers to a CAN bus network.
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel and
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel and galvanic isolation. It is an easy and very cost-efficient way to connect computers to a CAN bus network. This passive card has a modular design and can be expanded by a fieldbus expansion board to add an additional low-speed CAN…
The Ixxat CAN-IB120/PCIe Mini is a passive PCI Express Mini interface card with two CAN ch
The Ixxat CAN-IB120/PCIe Mini is a passive PCI Express Mini interface card with two CAN channels. It is an easy and very cost-efficient way to connect computers to a CAN bus network. Thanks to its extremely compact dimensions, the card is especially suitable for applications with limited space. The CAN socket is aligned to the…
Jos teillä on kysymyksiä tuotteistamme, tekoälyavustaja voi auttaa löytämään etsimänne.
