IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000B
IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy…
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Powe
IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide…
IKS-6726A-seeria on loodud vastama tööstuse ja äri valdkonna kriitilise tähtsusega rak
IKS-6726A-seeria on loodud vastama tööstuse ja äri valdkonna kriitilise tähtsusega rakenduste rangetele nõudmistele, nagu näiteks liikluskorraldussüsteemid ja merendusalased rakendused. IKS-6726A gigabit- ja kiire Etherneti magistraalvõrk, dubleeritud ringvõrk ning 24/48 VDC või 110/220 VAC kahe isoleeritud dubleeritud toiteallikaga suurendavad teie sideusaldusväärsust ja aitavad säästa kaabeldus- ja juhtmestuskulusid. Omadused ja eelised 2 Gigabit- ja 24 Fast Ethernet-porti…
IKS-6728A-seeria on loodud vastama äri- ja tööstussektori kriitilise tähtsusega rakend
IKS-6728A-seeria on loodud vastama äri- ja tööstussektori kriitilise tähtsusega rakenduste nõudmistele. IKS-6728A ja IKS-6728A-8PoE on varustatud kuni 24 10/100BaseT(X) või PoE/PoE+ pordiga ning 4 kombineeritud Gigabit Etherneti pordiga. IKS-6728A-8PoE Ethernet-lülitid pakuvad standardrežiimis kuni 30 vatti võimsust iga PoE+ pordi kohta ning toetavad ka kuni 36-vattist suure võimsusega väljundit töömahukate tööstuslike PoE-seadmete jaoks, nagu näiteks ilmastikukindlad…
24 Gigabit Ethernet ports. Up to 24 optical fiber connections (SFP slots). Fanless, -40 to
24 Gigabit Ethernet ports. Up to 24 optical fiber connections (SFP slots). Fanless, -40 to 75°C operating temperature range (T models). Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy. Isolated redundant power inputs with universal 110/220 VAC power supply range. Supports MXstudio for easy, visualized...
10/100BaseT(X) automaatne läbirääkimine ja automaatne MDI/MDI-X. Ühenduse rikke edasta
10/100BaseT(X) automaatne läbirääkimine ja automaatne MDI/MDI-X. Ühenduse rikke edastamine (LFPT). Toitekatkestuse ja pordi rikke häire releeväljundi kaudu. Redundantsed toite sisendid. Töötemperatuurivahemik -40 kuni 75 °C (-T-mudelid). Kavandatud kasutamiseks ohtlikes kohtades (klass 1, divisjon 2/tsoon 2, IECEx).
Toetab 10/100/1000BaseT(X) ja 1000BaseSFP pesa. Ãœhenduse rikke edastamine (LFPT). ToitehÃ
Toetab 10/100/1000BaseT(X) ja 1000BaseSFP pesa. Ühenduse rikke edastamine (LFPT). Toitehäire ja pordi katkestuse häire releeväljundi kaudu. Redundantsed toite sisendid. Töötemperatuurivahemik -40 kuni 75 °C (-T-mudelid). Kavandatud ohtlikesse kohtadesse (klass 1, divisjon 2/tsoon 2, IECEx). Saadaval on üle 20 valikuvõimaluse.
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X) ports to save the usage of copper ports High reliability and rigid IP-30 housing DIN-Rail and wall mounting
Mitmerežiimiline või üherežiimiline, SC- või ST-kiudoptilise pistikuga. Ühenduse rik
Mitmerežiimiline või üherežiimiline, SC- või ST-kiudoptilise pistikuga. Ühenduse rikke läbiviimine (LFPT). DIP-lülitid režiimide FDX/HDX/10/100/Auto/Force valimiseks.
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). -40 to 75°C operating temperature range (-T models). DIP switches to select FDX/HDX/10/100/Auto/Force.
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K jumbo frame. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Supports Energy-Efficient Ethernet (IEEE 802.3az).
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to f
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to fiber with SFP socket Support LFP (Link Fault Pass-through) function Supports full/half duplex operation mode P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts Supports store and forward transmission Provided DIP-Switch to set operation mode High reliability and rigid IP-30 housing DIN-Rail and…
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a
The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a M12 plug to devices with a D-Sub 9 connector. It allows various devices to connect to the CAN bus without the need for extra hardware, maintaining the use of existing devices and enhancing CAN system efficiency and…
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compli
The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compliant D-Sub 9 connector. It is tailored for the Ixxat USB-to-CAN V2 and USB-to-CAN FD adapters and facilitates seamless CAN bus connections. This cable allows various devices to connect to the CAN bus without the need for extra hardware or…
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m lon
The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m long, shielded and has twisted wires. The cable can also be used for CAN FD buses.
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m lon
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m long, shielded and has twisted wires. The D-Sub termination connector can also be used for CAN FD buses.
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD in
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interfa
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interface) and integrated bus termination resistors is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a…
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation up to 3 kV for higher protection of the CAN segments….
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN bus systems or to insert a galvanic isolation. The CAN-CR200 creates the necessary flexibility to optimize the structure of CAN…
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and one CAN backbone channel is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a physical…
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two seg
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV DC/3.5 kV AC for 1 second, allowing it to be utilized in medical applications. It can be used to improve the load capacity of the…
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD i
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with two CAN channels and
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with two CAN channels and galvanic isolation. It is an easy and very cost-efficient way to connect computers to a CAN bus network.
Kui Teil on küsimusi meie toodete kohta, aitab tehisintellektist assistent Teil leida otsitavat.
