Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. Built-in coil suppression for all DC coils – Saves you…
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. High Efficiency Dual DC Coils – Very low 12, 24,…
GV200 / 12-800 V dc Hermetically Sealed – Designed to meet: UL1604 for Class I & II
GV200 / 12-800 V dc Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. Built-in coil suppression for all…
GV21 is a very compact DC contactor for currents up to 100 A and 900 V dc. The GV21 exceed
GV21 is a very compact DC contactor for currents up to 100 A and 900 V dc. The GV21 exceeds IP67 and IP69 environmental requirements, as well as salt fog according to MIL-STD-810G. The GV21 is lightweight and compact (approximately 190g and H56xØ41mm) and hermetically sealed and gas-filled, which means it can be safely used…
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. Built-in coil suppression for all DC coils – Saves you…
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. High Efficiency Dual DC Coils – Very low 12, 24,…
GV250 is a very compact contactor for currents up to 250 A and max 1000 V dc. The GV250 ex
GV250 is a very compact contactor for currents up to 250 A and max 1000 V dc. The GV250 exceeds IP67 and IP69K environmental requirements, as well as salt fog according to MIL-STD-810. The GV250 is light and compact (approximately 76x81mm) and hermetically sealed and gas-filled, which means it can be safely used in almost…
GV350 is a very compact contactor for currents up to 500 A and max 1000 V dc. The GV350 ex
GV350 is a very compact contactor for currents up to 500 A and max 1000 V dc. The GV350 exceeds IP67 and IP69K environmental requirements, as well as salt fog according to MIL-STD-810. The GV350 is light and compact (approximately 76x81mm) and hermetically sealed and gas-filled, which means it can be safely used in almost…
2022 did Gigavac launch the brand new GVB35 Bi-Directional that is a very compact contacto
2022 did Gigavac launch the brand new GVB35 Bi-Directional that is a very compact contactor for currents up to 500 A and max 1000 V dc. The GVB35 exceeds IP67 and IP69K environmental requirements, as well as salt fog according to MIL-STD-810. Certification pending: CE, UL 60947-4-1, CCC. The GVB35 is light and compact (approximately…
Latching/Bi-stable, contacts held magnetically so no coil holding power required. A latchi
Latching/Bi-stable, contacts held magnetically so no coil holding power required. A latching contactor hermetically sealed and developed according to UL1604 and IP67 as well as RoHS and CE. Flame retardant according to SAE J1171 and ISO8846. Mounting is possible in all directions for easy installation.
SPST Normally Open High Voltage Contactors Ceramic seal PCB Mountable (optional) Bi-direct
SPST Normally Open High Voltage Contactors Ceramic seal PCB Mountable (optional) Bi-directional power switching Meets RoHS 2011/65/EU REACH Compliant
To be launched Q3 2025 Hermetically seal rated to 175°C with reduced risk of fire or melt
To be launched Q3 2025 Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current conditions. Backfilled with gas (primarily hydrogen) to effectively inhibit oxidation, resulting in low and stable contact resistance. The insulation resistance stands at 1000MΩ (1000Vdc), while the dielectric strength between the coil and contacts reaches 4.0kV….
Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current co
Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current conditions. Backfilled with gas (primarily hydrogen) to effectively inhibit oxidation, resulting in low and stable contact resistance. The insulation resistance stands at 1000MΩ (1000Vdc), while the dielectric strength between the coil and contacts reaches 4.0kV. Continuous current carry 150A at…
Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current co
Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current conditions. Backfilled with gas (primarily hydrogen) to effectively inhibit oxidation, resulting in low and stable contact resistance. The insulation resistance stands at 1000MΩ (1000Vdc), while the dielectric strength between the coil and contacts reaches 4.0kV. Continuous current carry 250A at…
Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current co
Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current conditions. Backfilled with gas (primarily hydrogen) to effectively inhibit oxidation, resulting in low and stable contact resistance. Continuous current carry 400A at 85°C, High short circuit current withstanding 10kA in 5ms Comply with IEC 60664-1 and RoHS standards.
Kui Teil on küsimusi meie toodete kohta, aitab tehisintellektist assistent Teil leida otsitavat.
