Simple low cost indicator with front dimensions 48×24 mm and LED size 8 mm. Power sup
Simple low cost indicator with front dimensions 48×24 mm and LED size 8 mm. Power supply 10 … 30 VDC. Analogue inputs 0-10V, 0-20 mA and 4-20 mA. Display range -19 999 to 99 999, adjustable zero and full scale value, 14 bits of resolution. Latch input to freeze the display, minimum/ maximum record memory….
The PROFINETt indicator PN350 can record, calculate, evaluate, display and pass on process
The PROFINETt indicator PN350 can record, calculate, evaluate, display and pass on process data. The interfaces also enable the configuration and scaling of the device during the transmission of status information during operation. It is ideally suited as an on-site indicator with a resistive touchscreen and multi-color graphic display (red, green, yellow). Product Features: Multifunction display with PROFINET interface Operating modes for displaying two process values and combination of the two values (1+2, 1‐2, 1×2, 1:2) …
The Motrona PU 202 is a level converter for incremental encoders from HTL (A,B,Z, 10-30V)
The Motrona PU 202 is a level converter for incremental encoders from HTL (A,B,Z, 10-30V) to TTL and RS422 standard levels, max. frequency 200 kHz. PU 202 can also translate different standards of direction signals to the quadrature standard. Power supply 5 VDC. Available as open p.c. boards with a frame for DIN rail mounting.
PU 204 from Motrona is a level converter for incremental encoders from TTL-RS422 standard
PU 204 from Motrona is a level converter for incremental encoders from TTL-RS422 standard to HTL (A,B,Z, 10-30V) level, max. frequency 200 kHz. PU 204 can also translate quadrature input signals to other standards of direction signals. Power supply 10-30 VDC. Available as open p.c. boards with a frame for DIN rail mounting.
– Signal inputs A, /A, B, /B, Z, /Z adjustable to TTL/RS422 level or to HTL (10-30V)
– Signal inputs A, /A, B, /B, Z, /Z adjustable to TTL/RS422 level or to HTL (10-30V) level. – Signal outputs A, /A, B, /B, Z, /Z (push-pull), output level depending on remote voltage (V ext. = 5 – 30V). – Potential separation between input and output by high-speed inductive coupler. – Suitable for conversion…
3 instantaneous safety contacts 1 instantaneous signaling contact Connection of: Emergency
3 instantaneous safety contacts 1 instantaneous signaling contact Connection of: Emergency stop button Mechanical safety switches Non-contact safety switches Safety components with OSSD outputs Single or dual-channel operation Feedback loop for monitoring downstream contactors or expansion modules Cyclical monitoring of the output contacts Display of switching status and mains via LED Automatic or manual start…
– Inputs for encoder lines sin+ / sin- / cos+ / cos- / ref+ / ref- with 1 Vpp format
– Inputs for encoder lines sin+ / sin- / cos+ / cos- / ref+ / ref- with 1 Vpp format. – Two sine-cosine output channels similar to input signal. – Two incremental quadrature outputs, each A, /A, B, /B, Z, /Z , with individually selectable output levels TTL/RS422 or HTL (10-30V). – Maximum operating frequency…
ZU210 from Motrona, is suitable to convert angular and positional information from a quadr
ZU210 from Motrona, is suitable to convert angular and positional information from a quadrature encoder to analogue and serial format. ZU210 is a signal converter for use with all incremental encoders, proximity switches etc. either with TTL/RS422 output or with HTL (10-30V) output. Features: – Analogue outputs +/- 10V, 0-20 mA or 4-20 mA, proportional…
Kui Teil on küsimusi meie toodete kohta, aitab tehisintellektist assistent Teil leida otsitavat.
