SPECIFICATIONS
• Cable connections flush with the chassis – Cables can be easily installed without the risk of tight bend radii and without additional mounting hardware.
• Robust EPIC® seal up to 175°C – Minimized risk of fire or deformation. Same technology used in advanced aerospace applications.
• Hermetically sealed – Designed and compliant with UL1604 for Class I & II, Div 2 and
Class III for use in hazardous areas, IP67 for temporary immersion in water for 30 minutes, IP69K for high-pressure washing, SAE J1171 – external ignition protection and ISO8846 for protection against ignition of flammable gases.
• High-efficiency dual drive coils – Very low 12VDC or 24VDC continuous power consumption with no EMI interference or crosstalk in your system. Ideal for battery-powered systems or other systems where low power consumption is required.
• Built-in filter for all DC coils – Saves you development time and extra cost as you do not need an external filter.
• Stainless steel nuts and mounting inserts for many years of corrosion-free service and long life.
• Not position sensitive – can be mounted in any position for easy installation.

CANBUS functions:
– Read: device ID, firmware version, current, temperature, cycle log, and optional voltage detection.
– Read/write: cut-off function at set minimum voltage, time delays, control of contactor levels to close and/or cut off.
– Contact us for information about CAN-BUS communication protocols.