Thermal circuit breakers from 35A to 150A at 30VDC. Weatherproof with manual reset and des
Thermal circuit breakers from 35A to 150A at 30VDC. Weatherproof with manual reset and designed for harsh environments. Common applications include electrical protection of heavy equipment and batteries for buses, heavy trucks, construction equipment, marine vehicles, off-road vehicles, and electric hybrid vehicles.
Thermal circuit breakers from 12.5A to 60A at 30VDC or 120VAC. Always weatherproof and wit
Thermal circuit breakers from 12.5A to 60A at 30VDC or 120VAC. Always weatherproof and with automatic or manual reset. The 7851 and 7854 series are both compact, lightweight, and suitable for extreme environments. Typical applications include protection of accessories, equipment, batteries for marine and off-road equipment, mining, agricultural equipment, and electric hybrid vehicles.
Thermal automatic fuses from 175A to 200A at 30 VDC Designed to meet the toughest environm
Thermal automatic fuses from 175A to 200A at 30 VDC Designed to meet the toughest environmental requirements. Specially designed for military vehicles, tail lifts, and motorhomes.
High-precision thermal circuit breaker from 15A to 30A at 30VDC. This weatherproof circuit
High-precision thermal circuit breaker from 15A to 30A at 30VDC. This weatherproof circuit breaker is available with manual or automatic reset. In addition to a fully sealed thermal element, this series of thermal circuit breakers has molded connection terminals and comes with protective rubber covers (shells). Suitable vehicle types include mobile military and ground equipment,…
Thermal circuit breakers from 2A to 40A at 30VDC or 120VAC. Fast response time and with au
Thermal circuit breakers from 2A to 40A at 30VDC or 120VAC. Fast response time and with automatic or manual reset. The C series is compact, lightweight, weatherproof if desired, and therefore suitable for harsh environments. Common applications include protection of accessories, equipment, and batteries for marine, off-road, adventure, mining, agriculture, and electric hybrids.
Features. See datashee
Features. See datashee
Features – Battery controller for DIN Rail UPS system. – Parallel connection t
Features – Battery controller for DIN Rail UPS system. – Parallel connection to DC BUS. – Suitable for 24V system up to 20A (allows battery sizes from 4Ah to 135Ah). – Installed on DIN Rail TS35 / 7.5 or 15. – Built-in battery test function. – Battery polarity protection. – Relay contact signal output and…
Features – Battery controller for DIN Rail UPS system. – Parallel connection t
Features – Battery controller for DIN Rail UPS system. – Parallel connection to DC BUS. – Suitable for 24V system up to 40A (allows battery sizes from 4Ah to 135Ah). – Installed on DIN Rail TS35 / 7.5 or 15. – Built-in battery test function. – Battery polarity protection. – Relay contact signal output and…
Characteristic： ●35W ●Economical models ●Compact size assemble on industrial rail
Characteristic： ●35W ●Economical models ●Compact size assemble on industrial rail TS-35 ●Plastic case ●No load low power consumption
Characteristic： ●50W ●Economical models ●Compact size assemble on industrial rail
Characteristic： ●50W ●Economical models ●Compact size assemble on industrial rail TS-35 ●Plastic case ●No load low power consumption
Characteristic： ●100W ●Surge protection ●No load low power consumption ●Ultra co
Characteristic： ●100W ●Surge protection ●No load low power consumption ●Ultra compact and 1U low profile(30mm), suitable for small space installation ●AC/DC terminal connection ●All-aluminum housing ●CE
Characteristic： ●60W ●Surge protection ●No load low power consumption ●Ultra com
Characteristic： ●60W ●Surge protection ●No load low power consumption ●Ultra compact and 1U low profile(30mm), suitable for small space installation ●AC/DC terminal connection ●All-aluminum housing ●CE
Thermal circuit breakers from 35A to 150A at 30 VDC. Available with automatic or manual re
Thermal circuit breakers from 35A to 150A at 30 VDC. Available with automatic or manual reset, trip indication, and as a switch in a single unit. The F series is weatherproof, spark-proof, and cannot be reset until the circuit is safe again. All this in a very robust design with terminal bolts available in 1/4"…
Product advantages: – Operating voltage up to 150VDC per pole for DC versions. ̵
Product advantages: – Operating voltage up to 150VDC per pole for DC versions. – Magnetothermal detection, magnetic only or thermal only. – Reinforced impact resistance, enabling use in the most demanding conditions, particularly in military applications. – Caliber marking on the activation button. – Sealing accessories on the front. – Special product according to customer…
Product advantages: – Operating voltage up to 150VDC per pole for DC versions. ̵
Product advantages: – Operating voltage up to 150VDC per pole for DC versions. – Magnetothermal detection, magnetic only or thermal only. – Reinforced impact resistance, enabling use in the most demanding conditions, particularly in military applications. – Caliber marking on the activation button. – Sealing accessories on the front. – Special product according to customer…
Support 1+1and N+1redundancy system Industrial. Channels:2 input and 1 output. Output curr
Support 1+1and N+1redundancy system Industrial. Channels:2 input and 1 output. Output current up to 20A. Ultra wide operating Temp. -40~+80℃(＞+60℃ derating). Suitable for redundancy operation of 12V/24V/48V system. Builti-in 2 channels DC OK signal and alarm relay contact. Ultra slim width:32mm. Cooling by free air convection. Installation：TS35/7.5 or TS35/15.
Support 1+1and N+1redundancy system. Channels:2 input and 1 output. Output current up to 2
Support 1+1and N+1redundancy system. Channels:2 input and 1 output. Output current up to 20A. Ultra wide operating Temp. -40~+80℃(＞+60℃ derating). Suitable for redundancy operation of 12V/24V/48V system. Built-in 2 channels DC OK signal and alarm relay contact. Ultra slim width: 55mm. Cooling by free air convection. Installation：TS35/7.5 or TS35/15.
The M7525 military power supply is a rugged DC to DC converter which accepts an 18 –
The M7525 military power supply is a rugged DC to DC converter which accepts an 18 – 48VDC input voltage range and provides a single DC output from 3.3 to 50V at up to 800W. Custom outputs available upon request and the unit is Designed to meet military standards, MIL-STD-704, MIL-STD-1275, MIL-STD-810, MIL-STD-461.
100% full load burn-in test. Protection: Over Voltage/Over load/Short circuit. Power ON LE
100% full load burn-in test. Protection: Over Voltage/Over load/Short circuit. Power ON LED indicator. TS 35 rail installation(with optional rail mounting bracket). Seismic protection. «Three pivot point»M4 installation. «Three-proof» treatment, suitable for harsh working environments. Terminal with protective cover. Alluminum case. Surge protection.
Superior ripple performance. 2:1 wide range input. 100% full load burn-in test. Protection
Superior ripple performance. 2:1 wide range input. 100% full load burn-in test. Protection: Over Voltage/Over load/Short circuit. Power ON LED indicator. TS 35 rail installation(with optional rail mounting bracket). Cooling by free air convection. Seismic protection. “Three pivot point”M4 installation. Terminal with protective cover. Alluminum case.
Superior ripple. 2:1 wide range input. 100% full load burn-in test. Protection: Over Volta
Superior ripple. 2:1 wide range input. 100% full load burn-in test. Protection: Over Voltage/Over load/Short circuit. Power ON LED indicator. TS 35 rail installation(with optional rail mounting bracket). Efficient natural cooling. Seismic protection. «Three pivot point»M4 installation. Terminal block with protective cover. Alluminum case.
Superior ripple. 2:1 wide range input. 100% full load burn-in test. Protection: Over Volta
Superior ripple. 2:1 wide range input. 100% full load burn-in test. Protection: Over Voltage/Over load. Power ON LED indicator. TS 35 rail installation (optional). Efficient natural cooling. Seismic protection. «Three pivot point»M4 installation. Terminal block with protective cover. Alluminum case.
Characteristic： ● 20W, Output 5-24V full categories. ● Slim size, assemble on indust
Characteristic： ● 20W, Output 5-24V full categories. ● Slim size, assemble on industrial rail TS-35 / 7.5 or 15mm. ● Plastic case. ● Universal AC input/Full range. ● No load power consumption
Characteristic： ● 40W, Output 5-48V full categories. ● Slim size, assemble on indust
Characteristic： ● 40W, Output 5-48V full categories. ● Slim size, assemble on industrial rail TS-35 / 7.5 or 15mm. ● Plastic case. ● Universal AC input/Full range. ● No load power consumption
Characteristic： ● 60W, Output 5-48V full categories. ● Slim size, assemble on indust
Characteristic： ● 60W, Output 5-48V full categories. ● Slim size, assemble on industrial rail TS-35 / 7.5 or 15mm. ● Plastic case. ● Universal AC input/Full range. ● No load power consumption
Si tiene preguntas sobre nuestros productos, el asistente de IA puede ayudarle a encontrar lo que busca.
