Components

Filter by attributes

Solution areas

Product categories

Brands

  • SGX250 Contactor 12-1000VDC

    SGX250 Contactor 12-1000VDC

    Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current co

    Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current conditions. Backfilled with gas (primarily hydrogen) to effectively inhibit oxidation, resulting in low and stable contact resistance. The insulation resistance stands at 1000MΩ (1000Vdc), while the dielectric strength between the coil and contacts reaches 4.0kV. Continuous current carry 250A at…

    View detailsDone
  • SGX400 Contactor 12-1000VDC

    SGX400 Contactor 12-1000VDC

    Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current co

    Hermetically seal rated to 175°C with reduced risk of fire or meltdown in over current conditions. Backfilled with gas (primarily hydrogen) to effectively inhibit oxidation, resulting in low and stable contact resistance. Continuous current carry 400A at 85°C, High short circuit current withstanding 10kA in 5ms Comply with IEC 60664-1 and RoHS standards.

    View detailsDone
  • SHKE

    SHKE

    PRINCIPAL TECHNICAL CHARACTERISTICS • Monobloc design in polycarbonate resin • Fire an

    PRINCIPAL TECHNICAL CHARACTERISTICS • Monobloc design in polycarbonate resin • Fire and smoke specification NFF 16-101 / NFF 16-102 • Railway standard: IEC60571, EN50155 • Operating temperature: -25°C to +70°C • Weight 113 g ±5% (470 / D470 / THL) • Mounting: DIN Rail EN50022 • Suitable for relay with B, D and H mounting…

    View detailsDone
  • SHT842 Solid State Relay for PCB 25A

    SHT842 Solid State Relay for PCB 25A

    3 x 25A/280VAC output 3.5-10 VDC control or 10-30 VDC control

    3 x 25A/280VAC output 3.5-10 VDC control or 10-30 VDC control

    View detailsDone
  • SIB942360 Solid State Relay

    SIB942360 Solid State Relay

    SIB942360 Switching current: 2x30A Switching voltage: 12-280VAC Control voltage: 12-24VDC

    SIB942360 Switching current: 2x30A Switching voltage: 12-280VAC Control voltage: 12-24VDC

    View detailsDone
  • SIM100 MLP Active Insulation Monitoring Device

    SIM100 MLP Active Insulation Monitoring Device

    The SIM100MLP is the first high-voltage isolation monitoring device for EV/HEVs capable of

    The SIM100MLP is the first high-voltage isolation monitoring device for EV/HEVs capable of operating correctly even when the battery is active, and experiencing large voltage variations, no variations, or even if the battery is not connected. The SIM100MLP continuously monitors the isolation resistance between a vehicle’s IT (Isolated Terra) power system and chassis for deterioration…

    View detailsDone
  • SIM100 MOD Active Insulation Monitoring Device

    SIM100 MOD Active Insulation Monitoring Device

    The SIM100MOD is the first high-voltage isolation monitoring device for EV/HEVs capable of

    The SIM100MOD is the first high-voltage isolation monitoring device for EV/HEVs capable of operating correctly even when the battery is active, and experiencing large voltage variations, no variations, or even if the battery is not connected. The device continuously monitors the isolation resistance between a vehicle’s IT (Isolated Terra) power system and chassis for deterioration…

    View detailsDone
  • SIM200 Active Insulation Monitoring Device

    SIM200 Active Insulation Monitoring Device

    The SIM200 Insulation Monitoring Device (IMD) is designed for continuous active monitoring

    The SIM200 Insulation Monitoring Device (IMD) is designed for continuous active monitoring of unearthed (Isolated Terra) DC systems including charging stations, electric vehicles, and any other system with a nominal operation above 60VDC. The SIM200 is UL2231 recognized to ensure safety at the highest standards and responds to electric hazards quickly and reliably with a…

    View detailsDone
  • Slim 120 Kiosk Moveable Plate

    Slim 120 Kiosk Moveable Plate

    Designed for situations where the system control is to be managed mobile, the cabin system

    Designed for situations where the system control is to be managed mobile, the cabin systems stand out with their features such as modern appearance, modular structure and high stability. Kiosk tables are designed for limited areas where operator arm applications are insufficient or for points where the control panel is constantly changing. Kiosk tables form…

    View detailsDone
  • Slim 60 Kiosk Moveable Plate

    Slim 60 Kiosk Moveable Plate

    Designed for situations where the system control is to be managed mobile, the cabin system

    Designed for situations where the system control is to be managed mobile, the cabin systems stand out with their features such as modern appearance, modular structure and high stability. Kiosk tables are designed for limited areas where operator arm applications are insufficient or for points where the control panel is constantly changing. Kiosk tables form…

    View detailsDone
  • SM-1000-003

    SM-1000-003

    Supplied with No. 20 contacts and No. 20 crimp. Weight 7g max. Used in conjunction with MT

    Supplied with No. 20 contacts and No. 20 crimp. Weight 7g max. Used in conjunction with MT-3000-003.

    View detailsDone
  • SM-1001-003

    SM-1001-003

    Supplied with No. 20 contacts and No. 20 crimp. Weight 14g max. Used in conjunction with M

    Supplied with No. 20 contacts and No. 20 crimp. Weight 14g max. Used in conjunction with MT-3000-003.

    View detailsDone
  • SM-1002-003

    SM-1002-003

    Weight 14g max. Used in conjunction with MT-3000-003. Supplied with No. 20 contacts and No

    Weight 14g max. Used in conjunction with MT-3000-003. Supplied with No. 20 contacts and No. 20 crimp.

    View detailsDone
  • Small Dimension Pancake slip ring

    Small Dimension Pancake slip ring

    This range of slip rings has been designed primarily for the transmission of signals, but

    This range of slip rings has been designed primarily for the transmission of signals, but has now been developed to accommodate power transmission also. Fine brass rings are used for signals and can be plated with silver, gold or rhodium where low contact resistance and low noise levels are required. The best results are obtained…

    View detailsDone
  • Smart Alarms 900 Series

    Smart Alarms 900 Series

    ECCO’s range of Smart Alarms® were the world’s first self-adjusting back-up alarms. S

    ECCO’s range of Smart Alarms® were the world’s first self-adjusting back-up alarms. Smart Alarms constantly measure ambient noise and adjust their sound level, creating a volume that is safe without being annoying or contributing to noise pollution. Smart Alarms eliminate the need for constant manual adjustment and help prevent intentional alarm disconnection.

    View detailsDone
  • SMB8650510 Solid State Relay 30A

    SMB8650510 Solid State Relay 30A

    SMB8650510 Switching current: 3x30A AC51 (resistive) / 3x12A AC53 (motor) Switching voltag

    SMB8650510 Switching current: 3x30A AC51 (resistive) / 3x12A AC53 (motor) Switching voltage: 24-520VAC Peak: 70A / 1600V Control voltage: 4-30VDC

    View detailsDone
  • SMB8670910 Solde state Relay 40A

    SMB8670910 Solde state Relay 40A

    SMB8670910 Switching current: 3x40A AC51 (resistive) / 3x16A AC53 (motor) Switching voltag

    SMB8670910 Switching current: 3x40A AC51 (resistive) / 3x16A AC53 (motor) Switching voltage: 150-520VAC Peak: 75A / 1600V Control voltage: 4-30VDC

    View detailsDone
  • SMB8850210 Solid State Relay 30A

    SMB8850210 Solid State Relay 30A

    SMB8850210 Switching current: 3x30A AC51 (resistive) / 3x12A AC53 (motor) Switching voltag

    SMB8850210 Switching current: 3x30A AC51 (resistive) / 3x12A AC53 (motor) Switching voltage: 24-640VAC Peak: 70A / 1600V Control voltage: 4-30VDC

    View detailsDone
  • SNAKPAK Magnetic Circuit Protectors

    SNAKPAK Magnetic Circuit Protectors

    The SNAPAK® series is a snap-acting hydraulic-magnetic circuit protector that combines po

    The SNAPAK® series is a snap-acting hydraulic-magnetic circuit protector that combines power switching and accurate, reliable circuit protection in one aesthetically pleasing package. The SNAPAK® combines the functions of three separate components: power switch, fuse and fuse holder. To the OEM, this means that only one item has to be mounted instead of three. Less…

    View detailsDone
  • SNE4004K

    SNE4004K

    Output expansion – 4 enables – 3 indicators

    Output expansion – 4 enables – 3 indicators

    View detailsDone
  • SNO4003K

    SNO4003K

    Base device: – single-channel activation in the supply. – circuit automatic and manual

    Base device: – single-channel activation in the supply. – circuit automatic and manual Reset. – with Reset button monitoring. – 3 enables – 1 indicator

    View detailsDone
  • SNO4062K

    SNO4062K

    Base device – single-channel or two-channel activation – automatic and manual Reset wi

    Base device – single-channel or two-channel activation – automatic and manual Reset with Reset button monitoring – short-circuit detection – 2 enables – 1 indicator

    View detailsDone
  • SNO4063K

    SNO4063K

    Base device – single-channel or two-channel activation – automatic and manual Reset â€

    Base device – single-channel or two-channel activation – automatic and manual Reset – with Reset button monitoring – cross monitoring – 3 enables

    View detailsDone
  • SNZ4052K

    SNZ4052K

    Base device – two-channel activation; 2x NC/NO start inhibit – cross monitoring – sy

    Base device – two-channel activation; 2x NC/NO start inhibit – cross monitoring – synchronous time monitoring – 2 enables – 1 indicator

    View detailsDone
  • SO-1064-10444/10445

    SO-1064-10444/10445

    Supplied with mounting hardware NO. 20 contacts and crimp for coil code J (SO-1064-10444).

    Supplied with mounting hardware NO. 20 contacts and crimp for coil code J (SO-1064-10444). Supplied with mounting hardware NO. 20 contacts and crimp for coil codes F,K (SO-1064-10445).

    View detailsDone