● LGA 1151 socket supports Intel® Xeon® E3 v5/v6, 6th/7th generation Core™ i3, Penti
● LGA 1151 socket supports Intel® Xeon® E3 v5/v6, 6th/7th generation Core™ i3, Pentium® or Celeron® processor supported ● Dual-channel DDR4 2133 MHz ● Intel® PCIe GbE with Intel® AMT11.0 support ● Support independent triple display with HDMI, DVI and VGA ● Support PCI Express generation 3.0 at 8GT/s I/O bandwidth ● USB 3.0 and…
● LGA 1151 Intel® 6th/7th generation Core™ i7/i5/i3, Pentium® or Celeron® processor
● LGA 1151 Intel® 6th/7th generation Core™ i7/i5/i3, Pentium® or Celeron® processor supported ● Dual-channel DDR4 2133MHz ● Support dual displays with VGA/HDMI/iDP ● Support USB 3.2 Gen 1 (5Gb/s) and SATA 6Gb/s
● LGA 1151 socket supports Intel® 6th/7th generation Core™ i7/i5/i3, Pentium® or Cel
● LGA 1151 socket supports Intel® 6th/7th generation Core™ i7/i5/i3, Pentium® or Celeron® processor supported ● Dual-channel DDR4 2133 MHz ● Support triple display with HDMI, DVI and VGA ● Support USB 3.0, SATA 6Gb/s and PCI Express Gen3 ● Support IPMI 2.0 via iRIS-2400 module ● IEI One Key Recovery solution allows you to…
● LGA1151 Intel® 8th/9th Generation Core™ i9/i7/i5/i3, Pentium® or Celeron® process
● LGA1151 Intel® 8th/9th Generation Core™ i9/i7/i5/i3, Pentium® or Celeron® processor ● Dual-channel DDR4 2666MHz ● Support VGA, HDMI & DP++ ● Support M.2 A key for WLAN expansion, M key for storage ● IEI One Key Recovery solution allows you to create rapid OS backup and recovery
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X. Link Fault Pass-Through (LFPT). Power
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X. Link Fault Pass-Through (LFPT). Power failure, port break alarm by relay output. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx).
10/100/1000BaseT(X) and 1000BaseSFP slot supported. Link Fault Pass-Through (LFPT). Power
10/100/1000BaseT(X) and 1000BaseSFP slot supported. Link Fault Pass-Through (LFPT). Power failure, port break alarm by relay output. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx). More than 20 options available.
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X
Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X) ports to save the usage of copper ports High reliability and rigid IP-30 housing DIN-Rail and wall mounting
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). DIP switches to select FDX/HDX/10/100/Auto/Force.
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).
Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). -40 to 75°C operating temperature range (-T models). DIP switches to select FDX/HDX/10/100/Auto/Force.
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K
Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K jumbo frame. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Supports Energy-Efficient Ethernet (IEEE 802.3az).
Product Code INOX.HANDLE.200M Material AISI 316L Weight 800 GR Surface Satine
Product Code INOX.HANDLE.200M Material AISI 316L Weight 800 GR Surface Satine
Product Code INOX.HANDLE.300M Material AISI 316L Weight 1065 GR Surface Satine
Product Code INOX.HANDLE.300M Material AISI 316L Weight 1065 GR Surface Satine
The sensors consist of a sensor head and an analysis module, and are laid out for use in v
The sensors consist of a sensor head and an analysis module, and are laid out for use in very hot work environments. Together with unparalleled service life in hot surroundings, large switching distances assure maximum system availability. Easily interchangeable sensor heads with numerous standard cable lengths are additionally available as separate replacement parts.Switching distance can…
The sensors consist of a sensor head and an analysis module, and are laid out for use in v
The sensors consist of a sensor head and an analysis module, and are laid out for use in very hot work environments. Together with unparalleled service life in hot surroundings, large switching distances assure maximum system availability. Easily interchangeable sensor heads with numerous standard cable lengths are additionally available as separate replacement parts. Switching distance…
The sensors consist of a sensor head and an analysis module, and are laid out for use in v
The sensors consist of a sensor head and an analysis module, and are laid out for use in very hot work environments. Together with unparalleled service life in hot surroundings, large switching distances assure maximum system availability. Easily interchangeable sensor heads with numerous standard cable lengths are additionally available as separate replacement parts.Switching distance can…
• Signal converter with analog input and IO-Link interface for analog input signals of
• Signal converter with analog input and IO-Link interface for analog input signals of ±10 V or 0/4 … 20 mA. • Precise signal processing: Ideal for the reliable acquisition and transmission of analog signals. • Versatile application possibilities: Switchable averaging and adjustable sampling intervals for each analog input.
• IO-Link coupler with strain gauge input and IO-Link interface for force sensors and lo
• IO-Link coupler with strain gauge input and IO-Link interface for force sensors and load cells. • High-precision measurements: Developed for the precise processing of strain gauge signals. • Generation of pending events possible: e.g. calculated bridge resistance above or below the set target resistance, bridge current > 50 mA, undervoltage, etc.
• Converter with incremental input and IO-Link interface for HTL/TTL/RS422 and NPN/PNP/N
• Converter with incremental input and IO-Link interface for HTL/TTL/RS422 and NPN/PNP/NAMUR encoders and sensors. • Fast data transmission: Ideal for real-time applications with high signal processing requirements. • Numerous connection options via expansion option (IO222/CO) (three additional control inputs and two additional control outputs).
• Coupler with SSI input and IO-Link interface for singleturn and multiturn encoders.
• Coupler with SSI input and IO-Link interface for singleturn and multiturn encoders. • Operating modes: As master or slave with clock frequencies up to 2 MHz. • Useful functions: Bit blanking, concentricity function and zero offset.
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting configurations can be made with TK048 stainless steel arm systems modules. The control panel’s surface is satin (brushed) patterned. Upon request, control panels can be made in different sizes, hole-cutting etc. operations can be performed on the panel.
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting configurations can be made with TK048 stainless steel arm systems modules. The control panel’s surface is satin (brushed) patterned. Upon request, control panels can be made in different sizes, hole-cutting etc. operations can be performed on the panel.
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting configurations can be made with TK048 stainless steel arm systems modules. The control panel’s surface is satin (brushed) patterned. Upon request, control panels can be made in different sizes, hole-cutting etc. operations can be performed on the panel.
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting
Operator control panels made of stainless steel 1.4301 (AISI 304). Many different mounting configurations can be made with TK048 stainless steel arm systems modules. The control panel’s surface is satin (brushed) patterned. Upon request, control panels can be made in different sizes, hole-cutting etc. operations can be performed on the panel.
The Airpax™ IPA/CPA hydraulic-magnetic circuit protectors provide low-cost power switchi
The Airpax™ IPA/CPA hydraulic-magnetic circuit protectors provide low-cost power switching, reliable circuit protection and accurate circuit control for equipment in the international marketplace. IPA models meet IEC spacing requirements that are mandatory for equipment which must comply with IEC specifications 601 and 950 and VDE specifications 0804 and 0805. In addition, they are UL Recognized…
Hvis du har spørgsmål om vores produkter, kan AI-assistenten hjælpe med at guide dig til det, du leder efter.
