Network Products

Filter by attributes

Solution areas

Product categories

Brands

  • IAR-142+ 4G

    IAR-142+ 4G

    Provide 2 port 10/100Base-T(X) port and 1 sim card slot 4G LTE Modem dial up included Prov

    Provide 2 port 10/100Base-T(X) port and 1 sim card slot 4G LTE Modem dial up included Provide HNAT enhance LAN to WAN routing performance Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported Secured Management by HTTPs Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem/Dial Up IP table to prevent access from unauthorized IP…

    View detailsGotowe
  • ICM SMT 360 Multi-GNSS Timing Module

    ICM SMT 360 Multi-GNSS Timing Module

    Protempis’s ICM SMT 360™ module is a multi-GNSS (GPS, GLONASS, BEIDOU and Galileo) rec

    Protempis’s ICM SMT 360™ module is a multi-GNSS (GPS, GLONASS, BEIDOU and Galileo) receiver, optimized for stationary applications to generate precise timing signal. The ICM SMT 360 is designed to provide time and frequency to small cells, from residential/enterprise femtocell to rural microcell. The ICM SMT 360 generates pulse per second (PPS) and a precise…

    View detailsGotowe
  • IES-1080A

    IES-1080A

    IES-1080A is a unmanaged Ethernet switch with 8 x 10/100Base-T(X) ports. IES-1080A support

    IES-1080A is a unmanaged Ethernet switch with 8 x 10/100Base-T(X) ports. IES-1080A support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

    View detailsGotowe
  • IES-150B

    IES-150B

    Features Supports 5 ports 10/100 Base-T(X) Supports auto-negotiation and auto-MDI/MDI-X Su

    Features Supports 5 ports 10/100 Base-T(X) Supports auto-negotiation and auto-MDI/MDI-X Supports store-and-forward transmission Supports flow control Compact size for easily installation Rigid IP-30 housing design DIN-Rail and wall mounting enabled

    View detailsGotowe
  • IES-A1080

    IES-A1080

    IES-A1080 is a unmanaged C1D2/ATEX Ethernet switch with 8 x 10/100Base-T(X) ports. IES-A10

    IES-A1080 is a unmanaged C1D2/ATEX Ethernet switch with 8 x 10/100Base-T(X) ports. IES-A1080 support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

    View detailsGotowe
  • IGAR-2062+ 4G

    IGAR-2062+ 4G

    High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed Provide 2 por

    High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed Provide 2 port 10/100/1000Base-T(X) port and 1 sim card slot Support dual 4G LTE dial up backup and load balance Provide HNAT enhance LAN to WAN routing performance Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported Secured Management by HTTPs Various kind of WAN…

    View detailsGotowe
  • IGMC-1011GP

    IGMC-1011GP

    Supports 1 ports 10/100/1000Base-T(X) autonegotiation and auto-MDI/MDI-X Supports 1 port 1

    Supports 1 ports 10/100/1000Base-T(X) autonegotiation and auto-MDI/MDI-X Supports 1 port 1000Base-X multi-mode/singlemode or SFP port Wide operating temperature range from -40 °C to 70°C Relay output to carry capacity of 1A at 24 VDC Rigid IP-30 housing design DIN-Rail and panel mounting

    View detailsGotowe
  • IGS-1050A

    IGS-1050A

    IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000B

    IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy…

    View detailsGotowe
  • IGS-1080A

    IGS-1080A

    IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Powe

    IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide…

    View detailsGotowe
  • IKS-G6524A 24G-port

    IKS-G6524A 24G-port

    24 Gigabit Ethernet ports. Up to 24 optical fiber connections (SFP slots). Fanless, -40 to

    24 Gigabit Ethernet ports. Up to 24 optical fiber connections (SFP slots). Fanless, -40 to 75°C operating temperature range (T models). Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy. Isolated redundant power inputs with universal 110/220 VAC power supply range. Supports MXstudio for easy, visualized...

    View detailsGotowe
  • IMC-101 Industrial Ethernet-to-fiber

    IMC-101 Industrial Ethernet-to-fiber

    10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X. Link Fault Pass-Through (LFPT). Power

    10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X. Link Fault Pass-Through (LFPT). Power failure, port break alarm by relay output. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx).

    View detailsGotowe
  • IMC-101G Industrial Gigabit Ethernet-to-fiber

    IMC-101G Industrial Gigabit Ethernet-to-fiber

    10/100/1000BaseT(X) and 1000BaseSFP slot supported. Link Fault Pass-Through (LFPT). Power

    10/100/1000BaseT(X) and 1000BaseSFP slot supported. Link Fault Pass-Through (LFPT). Power failure, port break alarm by relay output. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Designed for hazardous locations (Class 1 Div. 2/Zone 2, IECEx). More than 20 options available.

    View detailsGotowe
  • IMC-121FB

    IMC-121FB

    Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X

    Support 2 ports 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X 2×10/100 Base-T(X) ports to save the usage of copper ports High reliability and rigid IP-30 housing DIN-Rail and wall mounting

    View detailsGotowe
  • IMC-21 Entry-level industrial 10/100BaseT(X)-to-100BaseFX

    IMC-21 Entry-level industrial 10/100BaseT(X)-to-100BaseFX

    Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).

    Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). DIP switches to select FDX/HDX/10/100/Auto/Force.

    View detailsGotowe
  • IMC-21A - Industrial 10/100BaseT(X)-to-100BaseFX media converters.

    IMC-21A – Industrial 10/100BaseT(X)-to-100BaseFX media converters.

    Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT).

    Multi-mode or single-mode, with SC or ST fiber connector. Link Fault Pass-Through (LFPT). -40 to 75°C operating temperature range (-T models). DIP switches to select FDX/HDX/10/100/Auto/Force.

    View detailsGotowe
  • IMC-21GA - Industrial Gigabit Ethernet-to-fiber

    IMC-21GA – Industrial Gigabit Ethernet-to-fiber

    Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K

    Supports 1000Base-SX/LX with SC connector or SFP slot. Link Fault Pass-Through (LFPT). 10K jumbo frame. Redundant power inputs. -40 to 75°C operating temperature range (-T models). Supports Energy-Efficient Ethernet (IEEE 802.3az).

    View detailsGotowe
  • IPMC-111PB

    IPMC-111PB

    Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to f

    Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X Supports Ethernet to fiber with SFP socket Support LFP (Link Fault Pass-through) function Supports full/half duplex operation mode P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts Supports store and forward transmission Provided DIP-Switch to set operation mode High reliability and rigid IP-30 housing DIN-Rail and…

    View detailsGotowe
  • Ixxat CAN adapter cable 0,3 m (M12 to D-Sub 9)

    Ixxat CAN adapter cable 0,3 m (M12 to D-Sub 9)

    The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a

    The Ixxat M12 to D-Sub 9 adapter cable is an useful tool for connecting CAN devices with a M12 plug to devices with a D-Sub 9 connector. It allows various devices to connect to the CAN bus without the need for extra hardware, maintaining the use of existing devices and enhancing CAN system efficiency and…

    View detailsGotowe
  • Ixxat CAN adapter cable 0.2 m (RJ45 to D-Sub 9)

    Ixxat CAN adapter cable 0.2 m (RJ45 to D-Sub 9)

    The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compli

    The CAN adapter cable is an essential tool for converting an RJ45 socket into a CiA-compliant D-Sub 9 connector. It is tailored for the Ixxat USB-to-CAN V2 and USB-to-CAN FD adapters and facilitates seamless CAN bus connections. This cable allows various devices to connect to the CAN bus without the need for extra hardware or…

    View detailsGotowe
  • Ixxat CAN cable 2.0 m (D-sub plug to socket)

    Ixxat CAN cable 2.0 m (D-sub plug to socket)

    The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m lon

    The CAN cable is ideal suited for connection of CAN and CAN FD components. It is 2.0 m long, shielded and has twisted wires. The cable can also be used for CAN FD buses.

    View detailsGotowe
  • Ixxat CAN Y cable 0.22 m

    Ixxat CAN Y cable 0.22 m

    View detailsGotowe
  • Ixxat CAN Y cable 2.1 m

    Ixxat CAN Y cable 2.1 m

    The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m lon

    The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m long, shielded and has twisted wires. The D-Sub termination connector can also be used for CAN FD buses.

    View detailsGotowe
  • Ixxat CAN-CR100

    Ixxat CAN-CR100

    The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD in

    The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…

    View detailsGotowe
  • Ixxat CAN-CR110/FO

    Ixxat CAN-CR110/FO

    The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interfa

    The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interface) and integrated bus termination resistors is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a…

    View detailsGotowe
  • Ixxat CAN-CR120/HV

    Ixxat CAN-CR120/HV

    The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD

    The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation up to 3 kV for higher protection of the CAN segments….

    View detailsGotowe