The P600 Solid State Power Controller (SSPC) is a fully rated 80 Ampere device available f
The P600 Solid State Power Controller (SSPC) is a fully rated 80 Ampere device available for use in today’s and tomorrow’s Power Systems. This LEACH SSPC features reliable trouble free switching together with real short circuit protection. Load current is sensed and shutdown initiated within microseconds. Two status signals, derived from the load current value…
Crimp tool M 22520/7-01 with turret M 22520/7-12. Insertion and extraction tool MS 27534-2
Crimp tool M 22520/7-01 with turret M 22520/7-12. Insertion and extraction tool MS 27534-20 or M 81969/16-01. Weight 25g max. Temperature range -70° C to +125° C.
Crimp tool M 22520/7-01 with turret M 22520/7-12, insertion and extraction tool MS 27534-2
Crimp tool M 22520/7-01 with turret M 22520/7-12, insertion and extraction tool MS 27534-20 or M 81969/16-01. Weight 15g max. Temperature range -70° C to +125° C.
Crimp tool M 22520/7-01 with turret M 22520/7-12. Insertion and extraction tool MS 27534-2
Crimp tool M 22520/7-01 with turret M 22520/7-12. Insertion and extraction tool MS 27534-20 or M 81969/16-01. Weight 25g max. Temperature range -70° C to +125° C.
Crimp tool M 22520/7-01 with turret M 22520/7-12 & 13. Insertion and extraction tool
Crimp tool M 22520/7-01 with turret M 22520/7-12 & 13. Insertion and extraction tool M 81969/16-01 & 2. Weight 25g max. Temperature range -70° C to +125° C.
Tooling #22/20. Crimp tool M22520/2-01 with turret M22520/2-11 (Blue). Insertion and extra
Tooling #22/20. Crimp tool M22520/2-01 with turret M22520/2-11 (Blue). Insertion and extraction tool M81969/14-02. Weight 11g max. Temperature range -65° C to +125° C.
Tooling #16. Crimp tool M22520/1-01 with turret M22520/1-02 (Blue). Insertion and extracti
Tooling #16. Crimp tool M22520/1-01 with turret M22520/1-02 (Blue). Insertion and extraction tool M81969/14-03. — Tooling #22 (for S302). Crimp tool M 22520/2-01 with turret M 22520/2-14. Insertion and extraction tool M 81969/14-01. Weight 35g max. Temperature range -70° C to +125° C.
Tooling #12. Crimp tool M22520/1-01 with turret M22520/1-02 (Yellow). Insertion and extrac
Tooling #12. Crimp tool M22520/1-01 with turret M22520/1-02 (Yellow). Insertion and extraction tool M81969/14-04. — Tooling #16. Crimp tool M 22520/1-01 with turret M 22520/1-02 (Blue). Insertion and extraction tool M 81969/14-03. Weight 25g max. Temperature range -70° C to +125° C.
Tooling #16. Crimp tool M22520/1-01 with turret M22520/1-02 (Blue). Insertion and extracti
Tooling #16. Crimp tool M22520/1-01 with turret M22520/1-02 (Blue). Insertion and extraction tool M81969/14-03. Weight 35g max. Temperature range -70° C to +125° C.
Tooling #12: Crimp tool M22520/1-01 with turret M22520/1-02 (Yellow). Insertion and extrac
Tooling #12: Crimp tool M22520/1-01 with turret M22520/1-02 (Yellow). Insertion and extraction tool M81969/14-04. — Tooling #16: Crimp tool M 22520/1-01 with turret M 22520/1-02 (Blue). Insertion and extraction tool M 81969/14-03. — Tooling #20: Crimp tool M 22520/1-01 with turret M 22520/1-02 (Red). Insertion and extraction tool M 81969/14-02. Weight 45g max. Temperature range…
Tooling #22. Crimp tool M22520/1-01 with turret M22520/1-02 or 7-03. Insertion and extract
Tooling #22. Crimp tool M22520/1-01 with turret M22520/1-02 or 7-03. Insertion and extraction tool M81969/14-03. — Tooling #16. Crimp tool M 22520/1-01 with turret M 22520/1-02 or MS 3191-1. Insertion and extraction tool M 81969/14-03. Weight 65g max. Temperature range -70° C to +125° C.
Low profile. Bottom panel mount. Snaps into panel. Special models available upon request.
Low profile. Bottom panel mount. Snaps into panel. Special models available upon request.
Connections by 5 mm tabs according to ST363C. Contact Resistance < 5mΩ. Maximum Current 1
Connections by 5 mm tabs according to ST363C. Contact Resistance < 5mΩ. Maximum Current 15A. Dielectric Strength 2625 Vrms / 50 HZ. Insulation Resistance > 1000 MΩ at 100 Vdc. Weight 70g max.
Connections by 5 mm tabs according to ST363C. Contact Resistance < 5mΩ. Maximum Current 1
Connections by 5 mm tabs according to ST363C. Contact Resistance < 5mΩ. Maximum Current 15A. Dielectric Strength 2625 Vrms / 50 HZ. Insulation Resistance > 1000 MΩ at 100 Vdc. Weight 70g max.
Contact Resistance < 5mΩ. Maximum Current 15A. Dielectric Strength 2625 Vrms / 50 HZ. Ins
Contact Resistance < 5mΩ. Maximum Current 15A. Dielectric Strength 2625 Vrms / 50 HZ. Insulation Resistance > 1000 MΩ at 100 Vdc. Weight 70g max.
Monobloc design in thermoplastic resin. Fire and smoke specification NFF 16-102 (requireme
Monobloc design in thermoplastic resin. Fire and smoke specification NFF 16-102 (requirement 3). Electrical and environmental characteristics, in accordance with the relays characteristics. Hardware corrosion resistance steel. Crimp contacts in copper alloy. Installation torque, relay 0.45Nm, socket on structure 0.6Nm. Socket sealing plug for SFE37X/SFE47X/SFE67X: 11 0596 00 rear insertion.
Body: Thermoplastic. Mounting: Stainless steel, M3 or 4-40 UNC hardware. Contacts: Gold co
Body: Thermoplastic. Mounting: Stainless steel, M3 or 4-40 UNC hardware. Contacts: Gold copper alloy, size 16Tins plated on pins PCB side. Weight (with hardware): Types ”2RT”…………….15g max. Types ”4RT”…………….26g max. Types ”6RT” ……………37g max.
PRINCIPAL TECHNICAL CHARACTERISTICS • Monobloc design in polycarbonate resin • Fire an
PRINCIPAL TECHNICAL CHARACTERISTICS • Monobloc design in polycarbonate resin • Fire and smoke specification NFF 16-101 / NFF 16-102 • Railway standard: IEC60571, EN50155 • Operating temperature: -25°C to +70°C • Weight 113 g ±5% (470 / D470 / THL) • Mounting: DIN Rail EN50022 • Suitable for relay with B, D and H mounting…
Supplied with No. 20 contacts and No. 20 crimp. Weight 7g max. Used in conjunction with MT
Supplied with No. 20 contacts and No. 20 crimp. Weight 7g max. Used in conjunction with MT-3000-003.
Supplied with No. 20 contacts and No. 20 crimp. Weight 14g max. Used in conjunction with M
Supplied with No. 20 contacts and No. 20 crimp. Weight 14g max. Used in conjunction with MT-3000-003.
Weight 14g max. Used in conjunction with MT-3000-003. Supplied with No. 20 contacts and No
Weight 14g max. Used in conjunction with MT-3000-003. Supplied with No. 20 contacts and No. 20 crimp.
Supplied with mounting hardware NO. 20 contacts and crimp for coil code J (SO-1064-10444).
Supplied with mounting hardware NO. 20 contacts and crimp for coil code J (SO-1064-10444). Supplied with mounting hardware NO. 20 contacts and crimp for coil codes F,K (SO-1064-10445).
Supplied with mounting hardware (SO-1021-7127) or without mounting hardware (SO-1021-7126)
Supplied with mounting hardware (SO-1021-7127) or without mounting hardware (SO-1021-7126). Temperature range -55° C to +125° C. Weight 36g max.
SO-1059-8914 Relay Socket 25A Basic socket series designation for series KD. Designed to t
SO-1059-8914 Relay Socket 25A Basic socket series designation for series KD. Designed to the standards and requirements of MIL-S-12883. Supplied with mounting hardware and No. 12 contacts and crimp for power terminals and No. 16 contacts and crimp for coil terminals.
Jos teillä on kysymyksiä tuotteistamme, tekoälyavustaja voi auttaa löytämään etsimänne.
