InoxSens is the hygiene series from wenglor. The innovative design of InoxSens sensors all
InoxSens is the hygiene series from wenglor. The innovative design of InoxSens sensors allows contamination and cleaning agents to flow off by themselves. A variety of components form a complete system which integrates seamlessly into the machine.
• Measuring range 50 – 1000 mm • 100 million movements life • Special teflon b
• Measuring range 50 – 1000 mm • 100 million movements life • Special teflon bearing system • Infinite resolution • 5 kOhm : 50 – 600 mm 10 kOhm : 650 – 1000 mm
MOBİLE HYDRAULIC POSITION SENSORS In-Hydraulic Cylinders Non-Contact Magnetostrictive Pos
MOBİLE HYDRAULIC POSITION SENSORS In-Hydraulic Cylinders Non-Contact Magnetostrictive Position Measurement Sensors Datasheet below
These sensors have scratch-resistant optics and the emitted light can be switched off. The
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. wenglor interference-free technology (WinTec) has revolutionized sensor technology:It makes it possible to mount several sensors directly next to, or opposite each other without the sensors…
Absolute Pressure Switch: a switch designed to actuate at points referenced to absolute ze
Absolute Pressure Switch: a switch designed to actuate at points referenced to absolute zero. Altitude Switch, an absolute pressure switch with actuation points referenced as a distance of altitude. Gauge Pressure Switch is a switch designed to actuate at points referenced to atmospheric pressure. Differential Pressure Switch is a switch that detects variations in a…
Absolute Pressure Switch: a switch designed to actuate at points referenced to absolute ze
Absolute Pressure Switch: a switch designed to actuate at points referenced to absolute zero. Altitude Switch, an absolute pressure switch with actuation points referenced as a distance of altitude. Gauge Pressure Switch is a switch designed to actuate at points referenced to atmospheric pressure. Differential Pressure Switch is a switch that detects variations in a…
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-re
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-reflex sensor with a dot-shaped light spot. This makes it ideally suitable for reliably detecting the front edges of objects with irregular shapes or variable sizes. The sensor´s collimated laser light is absolutely homogeneous and can thus be precisely aligned to the…
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-re
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-reflex sensor with a dot-shaped light spot. This makes it ideally suitable for reliably detecting the front edges of objects with irregular shapes or variable sizes. The sensor´s collimated laser light is absolutely homogeneous and can thus be precisely aligned to the…
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-re
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-reflex sensor with a dot-shaped light spot. This makes it ideally suitable for reliably detecting the front edges of objects with irregular shapes or variable sizes. The sensor´s collimated laser light is absolutely homogeneous and can thus be precisely aligned to the…
The through-beam sensor works with a fine laser beam as well as a transmitter and a receiv
The through-beam sensor works with a fine laser beam as well as a transmitter and a receiver. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of just 0,6 millimeters. The transmitter can be deactivated using test input in order to…
The retro-reflex sensor works with red light and a reflector. It also reliably detects obj
The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can…
These miniature sensors determine distance between the sensor and the object by means of t
These miniature sensors determine distance between the sensor and the object by means of transit time measurement. wenglor’s interference-free technology (WinTec) is revolutionizing sensor technology: it prevents numerous sensors arranged directly opposite or next to each other from interfering with one another. The sensors reach a very high switching frequency and use laser class 1,…
The high-performance distance sensor with compact format accurately determines distance be
The high-performance distance sensor with compact format accurately determines distance between the sensor and the object on the basis of transit time measurement. Two mutually independent switching outputs and the intelligent IO-Link interface permit multifunctional use for precisely ascertaining distance to an object, or for detecting the object at any two switching points. A large…
The through-beam sensor works with red light as well as a transmitter and a receiver. Than
The through-beam sensor works with red light as well as a transmitter and a receiver. Thanks to their high light intensity, the sensor provides a high degree of operational reliability even with interferences like steam, fog or dust. The transmitter can be deactivated using test input in order to test the functionality of the through-beam…
The retro-reflex sensor works with a fine laser beam and a reflector. The collimated laser
The retro-reflex sensor works with a fine laser beam and a reflector. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of 0.75 millimeter over the entire range. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching…
The retro-reflex sensor works with a fine laser beam and a reflector. The collimated laser
The retro-reflex sensor works with a fine laser beam and a reflector. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of 0.75 millimeter over the entire range. The IO-Link interface can be used to configure retro-reflective barriers (PNP/NPN, NC/NO, switching…
The sensors function in accordance with the principle of transit time measurement with las
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny…
The sensors function in accordance with the principle of transit time measurement with las
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny…
The sensors function in accordance with the principle of transit time measurement with las
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny…
The sensors function in accordance with the principle of transit time measurement with las
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny…
The sensors function in accordance with the principle of transit time measurement with las
The sensors function in accordance with the principle of transit time measurement with laser class 1. The wintec with Dynamic Sensitivity technology (DS) enables previously unattainable reception sensitivity even with very weak signals. As a result, the sensors have a large working range of up to 10 m and can reliably detect dark or shiny…
The Wenglor P1PY217 is an advanced Time-of-Flight sensor that uses blue light to deliver r
The Wenglor P1PY217 is an advanced Time-of-Flight sensor that uses blue light to deliver reliable and stable distance measurements—even on challenging surfaces such as dark, shiny, transparent, or hot materials. With its robust design, high measurement accuracy, and long range of up to 5 meters, it’s an excellent choice for factory automation and quality control…
Absolute Pressure Switch: a switch designed to actuate at points referenced to absolute ze
Absolute Pressure Switch: a switch designed to actuate at points referenced to absolute zero. Altitude Switch, an absolute pressure switch with actuation points referenced as a distance of altitude. Gauge Pressure Switch is a switch designed to actuate at points referenced to atmospheric pressure. Differential Pressure Switch is a switch that detects variations in a…
Jos teillä on kysymyksiä tuotteistamme, tekoälyavustaja voi auttaa löytämään etsimänne.
