The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m lon
The CAN Y cable can be used to easily loop through CAN or CAN FD networks. It is 2.1 m long, shielded and has twisted wires. The D-Sub termination connector can also be used for CAN FD buses.
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD in
The CAN repeater CAN-CR100 with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interfa
The CAN-CR110/FO repeater with two CAN/CAN FD channels (thereof one as Fiber Optic interface) and integrated bus termination resistors is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a…
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD
The CAN repeater CAN-CR120/HV with integrated bus termination resistors and two CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation up to 3 kV for higher protection of the CAN segments….
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface
The modular CAN repeater CAN-CR200 with two CAN interfaces and one CAN backbone interface can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN bus systems or to insert a galvanic isolation. The CAN-CR200 creates the necessary flexibility to optimize the structure of CAN…
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and
The CAN-CR210/FO repeater with two CAN channels (thereof one as Fiber Optic interface) and one CAN backbone channel is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. It can be used to improve the load capacity of the CAN bus with nodes, to establish a physical…
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two seg
The CAN-CR220 repeater with two CAN channels is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV DC/3.5 kV AC for 1 second, allowing it to be utilized in medical applications. It can be used to improve the load capacity of the…
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD i
The CAN repeater CAN-CR300 with integrated bus termination resistors and four CAN/CAN FD interfaces can be used to improve the load capacity of the CAN bus with nodes, to establish a physical coupling of CAN/CAN FD bus systems or to insert a galvanic isolation. It creates the necessary flexibility to optimize the structure of CAN/CAN…
The Ixxat CAN@net NT 100 with one CAN channel is a multifunctional talent and a highly rel
The Ixxat CAN@net NT 100 with one CAN channel is a multifunctional talent and a highly reliable tool in the field of CAN. It can act as a gateway between CAN and Ethernet systems, providing easy and flexible access to the CAN system via LAN or the Internet. As a CAN-Ethernet-CAN bridge the CAN@net NT…
The Ixxat CAN@net NT 200 with two CAN channels is a multifunctional talent and a highly re
The Ixxat CAN@net NT 200 with two CAN channels is a multifunctional talent and a highly reliable tool in the field of CAN. It can act as a gateway between CAN and Ethernet systems, providing easy and flexible access to two independent CAN systems via LAN or over the Internet. As a CAN-Ethernet-CAN bridge the…
The Ixxat CAN@net NT 420 with four CAN channels (thereof two channels switchable to CAN FD
The Ixxat CAN@net NT 420 with four CAN channels (thereof two channels switchable to CAN FD) is a multifunctional talent and a highly reliable tool in the field of CAN. It can act as a gateway between CAN/CAN FD and Ethernet systems, providing easy and flexible access to up to four independent CAN or two…
The CANbridge NT 200 is a CAN to CAN bridge/gateway can be used to easily connect two CAN
The CANbridge NT 200 is a CAN to CAN bridge/gateway can be used to easily connect two CAN systems. It facilitates message exchange by allowing rules and functions to be implemented to control these messages. The CANbridge NT 200 thus enables easy coupling of CAN networks, conversion of networks with different bit rates or frame…
The CANbridge NT 420 is a CAN to CAN bridge/gateway with CAN FD support that can be used t
The CANbridge NT 420 is a CAN to CAN bridge/gateway with CAN FD support that can be used to easily connect up to four CAN or two CAN FD systems. It facilitates message exchange by allowing rules and functions to be implemented to control these messages. The CANbridge NT 420 thus enables easy coupling of…
The Ixxat CANnector L is a versatile communication platform with many different interfaces
The Ixxat CANnector L is a versatile communication platform with many different interfaces. It seamlessly integrates several bus systems into a single device – ideal for logging and gateway applications. This intelligent device operates independently, only requiring a PC for initial configuration or for data visualization. The core capabilities, such as transport protocols, are outsourced…
The Ixxat CANnector S is a versatile communication platform with many different interfaces
The Ixxat CANnector S is a versatile communication platform with many different interfaces. It seamlessly integrates several bus systems into a single device – ideal for logging and gateway applications. This intelligent device operates independently, only requiring a PC for initial configuration or for data visualization. The core capabilities, such as transport protocols, are outsourced…
The Ixxat CANnector SE is a versatile communication platform with many different interface
The Ixxat CANnector SE is a versatile communication platform with many different interfaces, including EtherCAT. It seamlessly integrates several bus systems into a single device – ideal for logging and gateway applications. This intelligent device operates independently, only requiring a PC for initial configuration or for data visualization. The core capabilities, such as transport protocols,…
The Ixxat D-Sub 9 connector with a switchable termination resistor offers a straightforwar
The Ixxat D-Sub 9 connector with a switchable termination resistor offers a straightforward solution to connect CAN interfaces with a D-Sub 9 interface to CAN networks. The connector provides flexible and quick termination to any high-speed CAN device. With the terminating resistor switched on, it can be used to terminate the bus at the end…
This connector combines two CAN termination resistors and provides easy and quick terminat
This connector combines two CAN termination resistors and provides easy and quick termination to any high-speed CAN or CAN FD product. The connector is used when a CAN node without internal termination needs to be terminated or if no CAN node is connected at the end of the CAN bus. According to ISO 11898-2, high-speed…
This connector provides easy and quick termination to any highspeed CAN or CAN FD product.
This connector provides easy and quick termination to any highspeed CAN or CAN FD product. The connector is used when a CAN node without internal termination needs to be terminated or if no CAN node is connected at the end of the CAN bus. According to ISO 11898-2, high-speed CAN buses / systems must be…
This connector provides easy and quick termination to any highspeed CAN or CAN FD product.
This connector provides easy and quick termination to any highspeed CAN or CAN FD product. The connector is used when a CAN node without internal termination needs to be terminated or if no CAN node is connected at the end of the CAN bus.According to ISO 11898-2, high-speed CAN buses / systems must be terminated…
These connectors provide easy and quick termination to any high-speed CAN/CAN FD product.
These connectors provide easy and quick termination to any high-speed CAN/CAN FD product. The connectors are used when a CAN node without internal terminal needs to be terminated or if no CAN node is connected at the end of the CAN bus. According to ISO 11898-2, high-speed CAN buses/systems must be terminated at their ends…
Managed Gigabit Ethernet XMC Switch Aitech’s M620 XMC is a high-performance Gigabit Ethe
Managed Gigabit Ethernet XMC Switch Aitech’s M620 XMC is a high-performance Gigabit Ethernet Switch for embedded and harsh environment applications. The M620 is based on the Marvell® Prestera® 98DX4122 Gigabit Ethernet Switch Controller and Marvell’s Routing OS. The M620 includes an embedded web server, providing HTML pages that allow the user to manage the switch….
Aitech’s M640 is a high-performance XMC Unmanaged Gigabit Ethernet Switch for embedded a
Aitech’s M640 is a high-performance XMC Unmanaged Gigabit Ethernet Switch for embedded and harsh environment applications. Gigabit Ethernet switching is performed by the Marvell Prestera® 98DX106. The switch is unmanaged and does not require any user configuration. The M640 provides up to ten Ethernet ports, each of which is factory configured as 1000Base-T or 1000Base-BX/KX….
The MILTECH 908 is a MIL-STD, fully managed network switch with 8 individual triple speed
The MILTECH 908 is a MIL-STD, fully managed network switch with 8 individual triple speed (10/100/1000) ports using MIL-D-38999 connectors. It is specifically designed for complex traffic applications featuring IEEE-STD-1588 (PTP) Capabilities and Synchronous Ethernet (SyncE).
The MIRO series from INSYS provides secure and stable routing in a very compact device for
The MIRO series from INSYS provides secure and stable routing in a very compact device for an attractive price. The mobile routers are suitable for secure Internet connections and remote maintenance, and impress with their high system stability, durability and ease of use. Highly compact design Easy integration into automatic dispensing machines and digital signage…
Jos teillä on kysymyksiä tuotteistamme, tekoälyavustaja voi auttaa löytämään etsimänne.
