GP250
Contacts rated at 2 Amps / 50 Vdc. Weight 11 g max. Dimensions of case 20.4 x 10.4 x 10.2
Contacts rated at 2 Amps / 50 Vdc. Weight 11 g max. Dimensions of case 20.4 x 10.4 x 10.2 mm max.
Tootekategooriad
Lahenduste valdkonnad
Kaubamärgid
-
-
GP5
Contacts rated at 2 Amps / 28 Vdc. Weight 11 g max. Dimensions of case 20.6 x 10.4 x 10.2
Contacts rated at 2 Amps / 28 Vdc. Weight 11 g max. Dimensions of case 20.6 x 10.4 x 10.2 mm max.
-
GP52
Contacts rated at 2 Amps / 28 Vdc. Weight 16 g max. Dimensions of case 20.5 x 10.4 x 20.5
Contacts rated at 2 Amps / 28 Vdc. Weight 16 g max. Dimensions of case 20.5 x 10.4 x 20.5 mm max.
-
GPIO-MM-XT 64-line Digital I/O + 10 Counter/Timer PC/104 Module
GPIO-MM is a PC/104 digital I/O module based on an FPGA, allowing multiple feature sets to
GPIO-MM is a PC/104 digital I/O module based on an FPGA, allowing multiple feature sets to be implemented on the same hardware platform. The FPGA is a Xilinx Spartan 2 RAM-based device with 200K gates (XC2S200). An on-board configuration flash memory device stores the FPGA code for automatic loading on power-up, and new code can…
-
GPS L1 and L2 Antenna
The Protempis Bullet DB GPS L1/L2 antenna is designed to provide a cost-effective L1/L2 an
The Protempis Bullet DB GPS L1/L2 antenna is designed to provide a cost-effective L1/L2 antenna. Dual frequency set-ups will benefit from increased signal availability, L1/L2 redundancy and elimination of atmospheric effects using dual frequencies techniques. The weatherproof housing is designed to withstand continuous exposure to shock, excessive vibration, extreme temperatures, water, and sunlight. For added…
-
GSD – GD, GN and GV series
Product advantages – Operating voltage up to 150 VDC per pole for DC versions. ̵
Product advantages – Operating voltage up to 150 VDC per pole for DC versions. – Magneto-thermal detection, magnetic only or thermal only. – Reinforced impact resistance allowing use in the most severe conditions, especially in Military applications. – Caliber marking on the engagement button. – Sealing accessories on the front face. – Special product according…
-
GSM – GM, GF and GC Series
Product advantages: – Operating voltage up to 150 VDC per pole for DC versions. R
Product advantages: – Operating voltage up to 150 VDC per pole for DC versions. – Magneto-thermal detection, magnetic only or thermal only. – Reinforced impact resistance allowing use in the most severe conditions, especially in Military applications. – Caliber marking on the engagement button. – Sealing accessories on the front face. – Special product according…
-
GTM400 Bi-directional Contactor 1500V/400A
The GTM400 and GTM500 are the first products released as a part of Sensata’s new GTM con
The GTM400 and GTM500 are the first products released as a part of Sensata’s new GTM contactor family which feature glass-to-metal seals (GTMS) – an industry first in contactor design. Glass-to-metal sealing is a technique used to create effective electrically-insulative hermetic seal technology. Leveraging over 50 years of expertise in GTMS, Sensata has engineered its…
-
GTM500 Bi-directional Contactor 1500V/500A
The GTM400 and GTM500 are the first products released as a part of Sensata’s new GTM con
The GTM400 and GTM500 are the first products released as a part of Sensata’s new GTM contactor family which feature glass-to-metal seals (GTMS) – an industry first in contactor design. Glass-to-metal sealing is a technique used to create effective electrically-insulative hermetic seal technology. Leveraging over 50 years of expertise in GTMS, Sensata has engineered its…
-
GV120 Contactor / 12-100 V dc
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. Built-in coil suppression for all DC coils – Saves you…
-
GV120 Contactor for PCB mount
With PCB mounting, you can save on costs when cables and connectors are minimized or compl
With PCB mounting, you can save on costs when cables and connectors are minimized or completely eliminated. Still, the contactor is hermetically sealed and developed according to UL1604 and IP67 as well as RoHS and CE. Flame retardant according to SAE J1171 and ISO8846. Mounting is possible in all directions for easy installation.
-
GV140 Contactor for PCB
With PCB mounting, you can save on costs when cables and connectors are minimized or compl
With PCB mounting, you can save on costs when cables and connectors are minimized or completely eliminated. Still, the contactor is hermetically sealed and developed according to UL1604 and IP67 as well as RoHS and CE. Flame retardant according to SAE J1171 and ISO8846. Mounting is possible in all directions for easy installation.
-
GV140 kontaktor / 12–100 V alalisvoolu
Hermetiliselt suletud – vastab järgmistele standarditele: UL1604 klassidele I ja II, Di
Hermetiliselt suletud – vastab järgmistele standarditele: UL1604 klassidele I ja II, Div 2 ning klassile III kasutamiseks ohtlikes kohtades, IP67 ajutiseks vee alla kastmiseks 30 minutiks, SAE J1171 – välise süttimiskaitse ning ISO8846 kaitseks süttimise eest tuleohtlike gaaside läheduses. Kõrge efektiivsusega kahepoolsed alalisvoolumähised – väga madal 12, 24 või 48 V alalisvoolu pidev võimsus mähistel,…
-
GV200 Contactor 12-800 VDC
GV200 / 12-800 V dc Hermetically Sealed – Designed to meet: UL1604 for Class I & II
GV200 / 12-800 V dc Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. Built-in coil suppression for all…
-
GV204 Encoder inputs
Encoder inputs: – 1 encoder input A, /A, B, /B, Z, /Z – Input level RS422 / TT
Encoder inputs: – 1 encoder input A, /A, B, /B, Z, /Z – Input level RS422 / TTL or HTL (adjustable) Encoder outputs: – 2 Outputs each A, /A, B, /B, Z, /Z – Output level RS422 / TTL or/ HTL (individually adjustable)
-
GV21 Contactor / 900 V dc
GV21 is a very compact DC contactor for currents up to 100 A and 900 V dc. The GV21 exceed
GV21 is a very compact DC contactor for currents up to 100 A and 900 V dc. The GV21 exceeds IP67 and IP69 environmental requirements, as well as salt fog according to MIL-STD-810G. The GV21 is lightweight and compact (approximately 190g and H56xØ41mm) and hermetically sealed and gas-filled, which means it can be safely used…
-
GV210 Dual Universal Level Converter
GV 210 is a universal encoder interface from Motrona, applicable as dual level converter,
GV 210 is a universal encoder interface from Motrona, applicable as dual level converter, encoder splitter and encoder cross switch. It has two encoder inputs A, B, Z, and /A, /B, /Z, each individually adjustable to either TTL/RS422 level or to HTL (10-30V) level. GV 210 has two signal outputs A, B, Z and /A,…
-
GV22 and GT22 Series for encoder signals
Product features: • Power supply from 10 up to 30 VDC • 1 encoder input for channels A
Product features: • Power supply from 10 up to 30 VDC • 1 encoder input for channels A, /A, B, /B, Z, /Z • Input levels selectable between RS422, TTL and HTL • Optionally types with 2, 4 or 8 outputs with or without potential separation available (see below) • Output levels are specified by…
-
GV220 Contactor for PCB mount
With PCB mounting, you can save on costs when cables and connectors are minimized or compl
With PCB mounting, you can save on costs when cables and connectors are minimized or completely eliminated. Still, the contactor is hermetically sealed and developed according to UL1604 and IP67 as well as RoHS and CE. Flame retardant according to SAE J1171 and ISO8846. Mounting is possible in all directions for easy installation.
-
GV220 Contactor / 100-800 V dc
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. Built-in coil suppression for all DC coils – Saves you…
-
GV240 Contactor for PCB mount
With PCB mounting, you can save on costs when cables and connectors are minimized or compl
With PCB mounting, you can save on costs when cables and connectors are minimized or completely eliminated. Still, the contactor is hermetically sealed and developed according to UL1604 and IP67 as well as RoHS and CE. Flame retardant according to SAE J1171 and ISO8846. Mounting is possible in all directions for easy installation.
-
GV240 Contactor / 100-800 V dc
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class II
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 – external ignition protection, and ISO8846 for protection against ignition around flammable gasses. High Efficiency Dual DC Coils – Very low 12, 24,…
-
GV250 Contactor / 1000 V dc
GV250 is a very compact contactor for currents up to 250 A and max 1000 V dc. The GV250 ex
GV250 is a very compact contactor for currents up to 250 A and max 1000 V dc. The GV250 exceeds IP67 and IP69K environmental requirements, as well as salt fog according to MIL-STD-810. The GV250 is light and compact (approximately 76x81mm) and hermetically sealed and gas-filled, which means it can be safely used in almost…
-
GV350 Contactor / PWM / 500 A 1000 V dc
GV350 is a very compact contactor for currents up to 500 A and max 1000 V dc. The GV350 ex
GV350 is a very compact contactor for currents up to 500 A and max 1000 V dc. The GV350 exceeds IP67 and IP69K environmental requirements, as well as salt fog according to MIL-STD-810. The GV350 is light and compact (approximately 76x81mm) and hermetically sealed and gas-filled, which means it can be safely used in almost…
-
GV350 PWM regulated Contactor for PCB mount
Brand new GV350 is a very compact contactor for currents up to 500 A and max 1000 V dc. Th
Brand new GV350 is a very compact contactor for currents up to 500 A and max 1000 V dc. The GV350 exceeds IP67 and IP69K environmental requirements, as well as salt fog according to MIL-STD-810. The GV350 is light and compact (approximately 76x81mm) and hermetically sealed and gas-filled, which means it can be safely used…
