Rugged graphite brushes for high currents We use so-called high-current brush holders for
Rugged graphite brushes for high currents We use so-called high-current brush holders for lightning protection and transferring earthing currents from static to rotating components. Excellent waterproof performance, adapted to the harsh environment at sea.
■ 15.6” (1366 x 768) TFT LCD Display ■ Extreme Computing Power & Graphic Displa
■ 15.6” (1366 x 768) TFT LCD Display ■ Extreme Computing Power & Graphic Display Capability ■ DDR4 slot x 2, up to 64GB ■ Support High Speed NVMe storage (M.2 2280) ■ GbE LAN x 2, RS232/422/485 x 2 ■ USB 3.2 Gen2 x 4 ■ Supports Intel® AMT ■ Wide Range 10-35V DC…
Extensive software control of features is the highlight of this digital I/O module featuri
Extensive software control of features is the highlight of this digital I/O module featuring 48 digital I/O lines, 3 16-bit counter/timers, and 3 independent PC bus interrupt inputs. The 48 digital I/O lines on Onyx-MM are based on 2 82C55 ICs. They can be programmed for input or output in groups of 8 lines. Direct…
Onyx-MM-DIO has 48 digital I/O lines using 2 82C55 ICs. Each chip has 24 I/O lines organiz
Onyx-MM-DIO has 48 digital I/O lines using 2 82C55 ICs. Each chip has 24 I/O lines organized as three 8-bit ports, A, B, and C. All I/O lines are connected to 10KOhm pull-up resistors, and on power-up or system reset, all ports reset to input and are pulled high. A control register on the 82C55…
Opal-MM-1616 is a PC/104 format digital I/O module designed for industrial applications re
Opal-MM-1616 is a PC/104 format digital I/O module designed for industrial applications requiring isolation between the computer and the external signals it is monitoring and controlling. The Opal-MM-1616 features 16 optoisolated digital inputs and 16 relay outputs. Each input has an input range of 0-30VDC. Opal-MM-1616 can be configured to generate an interrupt when any…
• Measuring range 50 – 1000 mm • 100 million movements life • Special teflon b
• Measuring range 50 – 1000 mm • 100 million movements life • Special teflon bearing system • Infinite resolution • 5 kOhm : 50 – 600 mm 10 kOhm : 650 – 1000 mm
MOBİLE HYDRAULIC POSITION SENSORS In-Hydraulic Cylinders Non-Contact Magnetostrictive Pos
MOBİLE HYDRAULIC POSITION SENSORS In-Hydraulic Cylinders Non-Contact Magnetostrictive Position Measurement Sensors Datasheet below
Developed & qualified for the civil aviation industry and covers many design requirem
Developed & qualified for the civil aviation industry and covers many design requirements. Top interchangeable.
These sensors have scratch-resistant optics and the emitted light can be switched off. The
These sensors have scratch-resistant optics and the emitted light can be switched off. They use the transit time measurement principle to measure the distance between the sensor and the object. wenglor interference-free technology (WinTec) has revolutionized sensor technology:It makes it possible to mount several sensors directly next to, or opposite each other without the sensors…
● 12.1″ XGA TFT LCD display ● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i
● 12.1″ XGA TFT LCD display ● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i3, Celeron® or Pentium® processors ● Intel® H110 chipset ● Less screw design for easy installation ● 4 USB 3.0, 2 USB 2.0 and 4 COM ● 1 PCIe x4 or 1 PCI slot ● Built-in speakers and optional Wi-Fi 802.11 b/g/n…
● 15″ XGA TFT LCD display ● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i3,
● 15″ XGA TFT LCD display ● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i3, Celeron® & Pentium® processors ● Intel® H110 chipset ● Less screw design for easy installation ● 4 USB 3.0, 2 USB 2.0, and 4 COM ● 1 PCIe x4 or 1 PCI slot ● Built-in speakers and optional Wi-Fi 802.11 b/g/n…
● 17″ SXGA TFT LCD display ● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i3
● 17″ SXGA TFT LCD display ● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i3, Celeron® or Pentium® processors ● Intel® H110 chipset ● Less screw design for easy installation ● 4 USB 3.0, 2 USB 2.0, and 4 COM ● 1 PCIe x4 or 1 PCI slot ● Built-in speakers and optional Wi-Fi 802.11 b/g/n…
With PCB mounting, you can save on costs when cables and connectors are minimized or compl
With PCB mounting, you can save on costs when cables and connectors are minimized or completely eliminated. Still, the contactor is hermetically sealed and developed according to UL1604 and IP67 as well as RoHS and CE. Flame retardant according to SAE J1171 and ISO8846. Mounting is possible in all directions for easy installation. GIGAVAC´s MiniTACTOR™…
This LEACH Solid State Power Controller features reliable, trouble free switching together
This LEACH Solid State Power Controller features reliable, trouble free switching together with real short circuit and overload protection. Load current is sensed and shutdown initiated within microseconds. A status signal is derived from the load current value or load voltage value and is reported via an optically isolated status output. Designed to operate in…
P150 product is obsolete (EOL) The P150 Series of Solid State Power Controllers (SSPC) is
P150 product is obsolete (EOL) The P150 Series of Solid State Power Controllers (SSPC) is rated from 2 to 30 Amperes. These LEACH SSPC’s feature reliable, trouble free switching together with real short circuit protection. Employing a power FET output stage, and built using thick film technology, they offer low on state resistance and low…
The P170 Series of Solid State Power Controllers (SSPC) is rated from 2 to 15 Amperes. The
The P170 Series of Solid State Power Controllers (SSPC) is rated from 2 to 15 Amperes. These LEACH SSPC’s feature reliable, trouble free switching together with real short circuit protection. Employing a power FET output stage, and built using thick film technology, they offer low on state resistance and low on state voltage drop. They…
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-re
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-reflex sensor with a dot-shaped light spot. This makes it ideally suitable for reliably detecting the front edges of objects with irregular shapes or variable sizes. The sensor´s collimated laser light is absolutely homogeneous and can thus be precisely aligned to the…
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-re
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-reflex sensor with a dot-shaped light spot. This makes it ideally suitable for reliably detecting the front edges of objects with irregular shapes or variable sizes. The sensor´s collimated laser light is absolutely homogeneous and can thus be precisely aligned to the…
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-re
The Retro-Reflex Sensor with Light Band scans a significantly larger range than a retro-reflex sensor with a dot-shaped light spot. This makes it ideally suitable for reliably detecting the front edges of objects with irregular shapes or variable sizes. The sensor´s collimated laser light is absolutely homogeneous and can thus be precisely aligned to the…
The through-beam sensor works with a fine laser beam as well as a transmitter and a receiv
The through-beam sensor works with a fine laser beam as well as a transmitter and a receiver. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of just 0,6 millimeters. The transmitter can be deactivated using test input in order to…
The retro-reflex sensor works with red light and a reflector. It also reliably detects obj
The retro-reflex sensor works with red light and a reflector. It also reliably detects objects with reflective or glossy surfaces at high speeds. Thanks to its great range, the sensor can, for example, be used to manage feed and presence controls as well as to detect objects on wide feed belts. The IO-Link interface can…
These miniature sensors determine distance between the sensor and the object by means of t
These miniature sensors determine distance between the sensor and the object by means of transit time measurement. wenglor’s interference-free technology (WinTec) is revolutionizing sensor technology: it prevents numerous sensors arranged directly opposite or next to each other from interfering with one another. The sensors reach a very high switching frequency and use laser class 1,…
If you have questions about our products the AI-assistant can help guide you to what you are searching for.
